To avoid possible reflection differences (for metallic, special effect, naturAL, and spectra colours), it is recommended to install the panels in the same direction as marked on the protective peel-off-foil. Colour variations may occur between panels originating from different production batches. To ensure colour consistency, the total requirement for a project should be placed in one order.

 

Dimensional tolerances
Thickness		±0.2 mm
Width		-0 / +4 mm
Lengths	1000 - 4000 mm	-0 / +6 mm
Lengths	4001 - 8000 mm	-0 / +10 mm

• To avoid residuals of glue sticking to the surface of the panels due to UV radiation, it is recommended to remove the protective foil as soon as possible after the installation.
• The protective foils and the panel surfaces must not be marked using ink (marker), adhesive tapes or stickers, as the lacquered surfaces could be damaged by solvents or plasticizers.
• Make sure to remove the protective foil as soon as possible after installation as weathering for a longer period could make the foil difficult to remove.

The frequency of cleaning depends on the design and the degree of soiling. For further information, please contact our technical support.

 

• Protect ALUCOBOND^® plus pallets during storage against rain, penetration of moisture and condensation.
• Only pallets of identical size should be stacked, with a maximum of 6 pallets stacked on top of each other.
• Storage exceeding 6 months should be avoided, as it may become difficult to remove the protective foil.
• When stacking the panels nothing should be placed in between them, as this could produce marks on the panels.

ALUCOBOND^® plus can be fully recycled, i.e. both the core material and the aluminium cover sheets can be recycled and used for the production of new material.