To avoid possible reflection differences (for metallic colours only), we recommend installing the panels in the direction of the marking shown on the protective foil of the individual panels.
Due to the production process, a displacement of the cover sheets of max. 2 mm to one side may occur along the longer sides of the panels.  

 

Dimensional tolerances
Thickness	±0.2 mm
Width	-0 / +2 mm
Lengths	1000 - 4000 mm	-0 / +4 mm
Lengths	4001 - 9000 mm	-0 / +6 mm

• To avoid residuals of glue sticking to the surface of the panels due to UV radiation, it is recommended to remove the protective foil as soon as possible after the installation.
• The protective foils and the panel surfaces must not be marked using ink (marker), adhesive tapes or stickers, as the lacquered surfaces could be damaged by solvents or plasticizers.
• Make sure to remove the protective foil as soon as possible after installation as weathering for a longer period could make the foil difficult to remove.

The frequency of cleaning depends on the design and the degree of soiling. For further information, please contact our technical support.

 

• Protect ALUCORE^® pallets during storage against rain, penetration of moisture and condensation.
• Only pallets of identical size should be stacked, with a maximum of 6 pallets stacked on top of each other.
  The stacking height per pallet should not exceed 2 m.
• Storage exceeding 6 months should be avoided, as it may become difficult to remove the protective foil.
• When stacking the panels nothing should be placed in between them, as this could produce marks on the panels.