ALUCOBOND® / ALUCORE® ALUCOBOND® / ALUCORE® 40 years of excellence  
NewsProductsReferencesService CenterCompanyContact
 
Products
ALUCOBOND®

ALUCOBOND® - Processing: Lacquering

Lacquering

Back to Index

ALUCOBOND® Surface Treatment

Overlacquering of ALUCOBOND® surfaces using suitable lacquer qualities

Please note:


  • The maximum permissible temperature of the material (ALUCOBOND® panels) must not exceed 70°C when applying fast-drying methods. During the drying process at high temperatures the ALUCOBOND® panels must be positioned or stored with great care to prevent deforming.
  • ALUCOBOND® cut edges should not be in contact with organic solvents for a prolonged period of time to avoid weakening the bond.
  • ALUCOBOND® panels lacquered or overlacquered at a later stage should not be bent or folded. The lacquer in the bends or folds may be damaged due to the low elasticity of the top coat.
  • Only inferior lacquer adhesion can be achieved on core material exposed at cut edges.
  • Please make a test prior to overlacquering and follow the instructions of the lacquer suppliers.

Lacquering of mill-finished ALUCOBOND® surfaces


The composition of lacquer coating for ALUCOBOND® is basically the same as those for mill-finished aluminium surfaces. It is advisable to be familiar with coating systems and materials as well as working methods for aluminium.