ALUCOBOND® plus - Processing: Cutting
ALUCOBOND® plus can be cut with a vertical panel saw, circular or jig saw.
Carbide tipped (CT) saw blades
Blade geometry | Tooth thickness approx. 2 - 4 mm, tapered to the inside to prevent jamming | Tooth geometry | Trapezoid tooth / flat tooth | Pitch t | 10 - 12 mm | Clearance angle α | 15° | Rake angle γ | 10° positive | Maximum feed s | 20 m/min | | |
Important: | For ALUCOBOND® plus special carbide tipped (CT – quality K01) saw blades are used. The speed must be reduced by 50%. |
Carbide tipped (CT) saw blades for HOLZ-HER and Striebig circular panel saws.
Trapezoid/flat tooth saw blade, flat teeth 45° chamfered for burr-free edges.
Saw blade-Ø | D = 300 mm (for Striebig vertical panel saw Standard II) | Number of teeth | t = 72
Speiser Code No. 070 60 651 | Saw blade-Ø | D = 250 mm
(for Holz-Her vertical panel saw 1255 ALUCOBOND® plus) | Number of teeth | t = 60
Speiser Code No. 020 40 151 | Bore ø | D = 30 mm | Tooth thickness | 3.2 mm | Clearance angle α | 15° | Rake angle γ | 10 ° positive |
|
